Jeep Commander Transmission Over Temp: (Guaranteed Fix!)


Jeep Commander Transmission Over Temp

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

Experiencing a ‘Transmission Over Temp’ warning on your Jeep Commander can be both concerning and frustrating.

But don’t fret, because we’ve got a simple fix to this issue that’ll get you back on the road in no time! No need for expensive repairs or complicated procedures – our easy-to-follow guide will help you rectify this problem swiftly and efficiently.

So, what’s the quick solution to the “Jeep Commander Transmission Over Temp” problem? Well, most often it involves cooling down your transmission fluid by improving its circulation or replacing it entirely if necessary.

Jeep Commander Transmission Over Temp 100% Solution?


The “Transmission Over Temp” warning on a 2006 Jeep Commander could indicate various issues. It may be caused by a faulty sender, wiring issues, or even a problematic PCM. Temperature sensor readings, fluid checks, and PCM replacement may help diagnose and resolve the problem.

Here In the below image You Can see the proof 👇, one of our reader who fixed his Jeep Commander Transmission Over Temp Problem by using our method this issue was due to PCM so, he considered replacing the PCM and the issue got fixed! 😍

Jeep Commander Transmission Over Temp

Common Symptoms of Jeep Commander Transmission Over Temp:

Jeep Commanders may exhibit several telltale signs when their transmission temperature rises above the normal range. If you’re a Jeep owner, keep an eye out for these common symptoms:

  • Dashboard Warning Light: The most obvious sign is the illumination of the “transmission over temp” warning light on your dashboard.
  • Unusual Gear Shifting: You might notice abrupt or delayed gear shifts. This can make driving feel jerky and inconsistent.
  • Strange Noises: A high-pitched whine or clunking sound could indicate excessive heat in the transmission.

Here’s a quick rundown:

Dashboard Warning LightIllumination of ‘transmission over temp’ warning light
Unusual Gear ShiftingAbrupt or delayed gear shifts making driving feel jerky
Strange NoisesHigh-pitched whine or clunking sound coming from your vehicle indicating excessive heat

Understanding these symptoms is crucial to avoiding potential damage to your vehicle’s transmission system and ensuring smooth operation. When noticed, seek professional help immediately.

Causes of Jeep Commander Transmission Over Temp:

The “Transmission Over Temp” warning on a 2006 Jeep Commander can be attributed to several underlying causes, each requiring thorough investigation and diagnosis.

1. Insufficient Transmission Fluid Levels

Jeep Commander Transmission Over Temp

Without enough fluid, a transmission cannot maintain optimum temperature.

  • Low levels = More friction = Higher temperatures

2. Degraded or Old Transmission Fluid

Older fluid loses its cooling and lubricating properties.

  • Worn-out fluid = Less effective heat dissipation

3. Faulty Temperature Sensor:

One potential cause is a faulty temperature sensor, which may provide inaccurate readings to the vehicle’s computer system, triggering the warning unnecessarily.

4. Wiring Issues:

Jeep Commander Transmission Over Temp

Additionally, wiring issues, such as shorts or breaks in the wiring harness connected to the transmission temperature sensor, can disrupt the signal transmission and lead to false warnings.

5. PCM:

Another possible culprit is a malfunctioning Powertrain Control Module (PCM), responsible for regulating various functions within the vehicle, including transmission operation.

A faulty PCM may misinterpret sensor data or fail to properly control transmission components, resulting in overheating conditions.

6. Transmission Itself:

Moreover, mechanical issues within the transmission itself, such as a failing solenoid pack or a clogged transmission fluid filter, can lead to inadequate fluid circulation and overheating.

Jeep Commander Transmission Over Temp

To accurately diagnose the cause of the “Transmission Over Temp” warning, comprehensive testing, including code retrieval, sensor inspection, fluid analysis, and potentially PCM replacement, may be necessary.

You can also watch this video for fixing this issue:

Step-by-Step Guide to Diagnosing Jeep Commander Transmission Over Temp:

Jeep Commander Transmission Over Temp

Diagnosing a “Transmission Over Temp” warning on a Jeep Commander requires a systematic approach to identify the underlying cause accurately. Follow these step-by-step guidelines:

  1. Check Transmission Fluid Level: Begin by ensuring the transmission fluid level is within the recommended range. Low fluid levels can lead to inadequate lubrication and overheating. If low, top up the fluid to the correct level and monitor for any changes in warning messages.
  2. Inspect Transmission Fluid Condition: Examine the color and odor of the transmission fluid. Burnt or discolored fluid may indicate internal transmission problems, such as overheating or excessive wear. If the fluid appears abnormal, it may be necessary to drain and replace it.
  3. Retrieve Diagnostic Trouble Codes (DTCs): Use an OBD-II scanner to retrieve any stored DTCs related to the transmission system. These codes can provide valuable insights into the specific issue triggering the warning message.
  4. Check Transmission Temperature Sensor: Inspect the wiring and connections leading to the transmission temperature sensor. Look for signs of damage, corrosion, or loose connections that could interfere with sensor readings. Test the sensor’s resistance to ensure it is within the specified range.
  5. Test Transmission Operation: Conduct a road test to evaluate the transmission’s performance under various driving conditions. Pay attention to any unusual shifting patterns, slipping, or hesitation, which may indicate internal transmission problems.
  6. Inspect Solenoid Pack: If applicable, inspect the solenoid pack located within the transmission for signs of damage or malfunction. Faulty solenoids can disrupt fluid flow and lead to overheating.
  7. Check Powertrain Control Module (PCM): Perform a comprehensive scan of the PCM for any stored codes or anomalies. A malfunctioning PCM can misinterpret sensor data and trigger false warning messages. Consider resetting or reprogramming the PCM as needed.
  8. Monitor Transmission Temperature: Use a diagnostic tool to monitor real-time transmission temperature readings while driving. Compare the observed temperatures with the manufacturer’s specifications to determine if overheating is occurring.
  9. Inspect Cooling System: Ensure the vehicle’s cooling system, including the radiator, coolant lines, and cooling fan, is functioning correctly. Overheating in the engine coolant can indirectly affect transmission temperatures.
  10. Consult Professional Mechanics: If unable to pinpoint the issue, seek assistance from experienced mechanics or authorized Jeep service centers. They have access to specialized diagnostic equipment and expertise to diagnose and repair complex transmission problems.

The Simple Fix for Jeep Commander Transmission Over Temp Issue:

The most straightforward fix for a Jeep Commander experiencing a “Transmission Over Temp” issue involves addressing common causes that can be easily rectified:

  1. Check Transmission Fluid: Ensure the transmission fluid level is adequate and within the recommended range. Low fluid levels can lead to overheating. If low, top up the fluid to the correct level.
  2. Inspect Transmission Cooler: Examine the transmission cooler for any signs of blockage or damage. Clear any obstructions and ensure proper airflow to facilitate efficient cooling of the transmission fluid.
  3. Replace Transmission Temperature Sensor: If the transmission temperature sensor is faulty or providing inaccurate readings, consider replacing it. A malfunctioning sensor can trigger false warning messages.
  4. Clean Electrical Connectors: Clean and inspect the electrical connectors and wiring associated with the transmission system. Corrosion or poor connections can disrupt sensor signals and lead to warning messages.
  5. Reset PCM: Resetting the Powertrain Control Module (PCM) can sometimes resolve minor issues or clear erroneous codes triggering the warning message. Disconnect the battery for a few minutes, then reconnect to reset the PCM.
  6. Ensure Proper Driving Conditions: Avoid towing heavy loads or driving in extreme temperatures that can put additional strain on the transmission. Drive under normal operating conditions to minimize the risk of overheating.
  7. Monitor Transmission Temperature: Use an infrared temperature gun or diagnostic tool to monitor the transmission temperature during driving. Keep an eye on temperature fluctuations and address any issues promptly.
  8. Regular Maintenance: Maintain regular transmission maintenance, including fluid changes and filter replacements, as recommended by the manufacturer. Proper maintenance can help prevent overheating and prolong transmission life.

By addressing these simple fixes, you can often resolve the “Transmission Over Temp” issue on your Jeep Commander without the need for extensive repairs or professional intervention.

However, if the problem persists or if there are underlying mechanical issues, it may be necessary to seek assistance from qualified mechanics or service professionals.

Tools You’ll Need for Fixing a Jeep Commander Transmission Over Temp:

Before starting the fix, get these tools ready:

  • Socket Set: A complete set is ideal. The most useful sizes will be 10mm, 12mm, and 14mm.
  • Wrenches: Standard and adjustable wrenches are required for various bolts.
  • Screwdrivers: Both Phillips head and flathead screwdrivers can come in handy.

Here’s a quick reference table of the tools needed:

Socket Set10mm, 12mm, 14mm
WrenchesStandard & Adjustable
ScrewdriversPhillips Head & Flathead

Follow these steps to make sure you’re prepared:

  1. Gather all the necessary tools from the list above.
  2. Organize your workspace where you’ll be working on your Jeep Commander.
  3. Make sure each tool is in good working condition.

Remember: Safety first! Always wear protective gloves to prevent any injury during work.

Detailed Instructions for Resolving the Transmission Over Temp Issue:

Resolving the “Transmission Over Temp” issue on your Jeep Commander doesn’t have to be complicated. Just follow these easy steps:

  1. Check Fluid Levels: Start by examining the transmission fluid level. If it’s low, fill up to the required mark.
  2. Inspect Fluid Condition: Look at color and smell of fluid. It should not be burnt or black in color.
  3. Cooling System Check: Verify whether cooling system is working properly. A malfunctioning cooling system can cause overheating issues.
  4. Scan for Error Codes: Use an OBD-II scanner to check if there are any error codes related with transmission overheat condition.
  5. Professional Help: If all else fails, seek professional help from a certified mechanic or nearest dealership service center.
1Check Fluid Levels
2Inspect Fluid Condition
3Cooling System Check
4Scan for Error Codes
5Seek Professional Help

Remember! Ignoring this warning could lead to serious damage in your vehicle’s transmission system resulting in expensive repairs or replacements down the line.

Tips and Tricks to Prevent Future Episodes of Transmission Over Temp in Your Jeep Commander:

Regular maintenance is key when it comes to preventing issues like transmission over temp. Here are some tips:

  • Check Fluid Levels Regularly: Low fluid levels can cause your transmission to overheat. Check these at least once a month.
  • Use the Right Transmission Fluid: Not all fluids are created equal! Make sure you’re using the right one for your Jeep Commander.
  • Get Regular Servicing: Routine check-ups with a trusted mechanic can catch potential problems before they become serious.

Here’s an easy schedule to remember:

Check Fluid LevelsOnce a Month
Change Transmission FluidEvery 30,000 Miles
General Service Check-UpTwice a Year

And don’t forget these important steps:

  1. Allow Car To Warm Up: This helps get the fluids moving and reduces stress on your engine.
  2. Avoid Hard Acceleration: High revs can put unnecessary strain on your transmission, leading to overheating.
  3. Consider Installing A Transmission Cooler: If you live in a hot climate or do lots of heavy towing, this could be a good investment.

Remember, prevention is better than cure! By following these steps, you’ll ensure that your Jeep Commander stays healthy for many miles down the road.

Frequently Asked Questions About Jeep Commander Transmission Over Temp

What does “Transmission Over Temp” mean?

It indicates that the transmission fluid in your Jeep Commander is overheating. This could be due to various reasons such as low fluid levels, or a malfunctioning transmission cooler.

How dangerous is it when my dashboard displays “Transmission Over Temp”?

If ignored, it can lead to severe damage to your vehicle’s transmission system. It’s crucial to address this issue promptly.

Can I drive my Jeep Commander with an over-temperatured transmission?

Driving with an overheated transmission poses risks of serious damages not only to your vehicle’s gearbox but also other internal parts which might result in costly repairs.

What should I do if the “Transmission Over Temp” light comes on?

Stop driving immediately and turn off your vehicle.
Allow the engine time to cool down.
Check the transmission fluid level and add more if necessary.
If the problem persists, contact a professional mechanic for assistance.

Transmission over temp warning appearsStop driving and let car cool down
Warning continues after cooling periodCheck transmission fluid level
Persistent warning despite steps takenContact a professional mechanic

Conclusion and final thoughts

Fixing the ‘Jeep Commander Transmission Over Temp’ issue doesn’t have to be an intimidating task.

With a clear understanding of the problem, swapping out the old transmission fluid for new, and ensuring your cooling system is in optimal condition can save you from expensive repairs down the line.

Remember that routine maintenance checks are key to preventing this issue.

In case these simple fixes don’t resolve your Jeep’s over temp transmission woes, it might be time to pay a visit to a professional mechanic.

While we’d all love DIY solutions for everything car-related, some situations require expert intervention. Don’t forget: Your safety should always come first when dealing with any vehicle issues!

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest Posts