5 Common Causes of P1135 Toyota Camry (100% Fixed!)


Common Causes of P1135 Toyota Camry

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

The P1135 Toyota Camry can be triggered by several factors. These include a faulty air/fuel ratio sensor, a bad wiring harness, a blown fuse, or even a faulty PCM.

In this article, we will explore each of these potential causes and provide insights on how to diagnose and fix the issue.

If you’ve encountered the P1135 code in your Toyota Camry, read on to find out more about what could be causing it and how you can resolve the problem.

What Is the P1135 Toyota Camry?

The P1135 code in a Toyota Camry refers to a specific diagnostic trouble code (DTC) that indicates a problem with the air/fuel ratio sensor.

This sensor plays a crucial role in monitoring and adjusting the fuel mixture going into the engine, ensuring optimal combustion efficiency.

When this error code appears, it means that there is an issue with the air/fuel ratio sensor circuit on bank 1 of the engine. Bank 1 typically refers to the side of the engine where cylinder number 1 is located.

There are several potential causes for this code:

  • Faulty air/fuel ratio sensor: A malfunctioning or damaged sensor can lead to inaccurate readings and trigger the P1135 DTC.
  • Bad wiring harness: If there are problems with the wiring connecting the air/fuel ratio sensor to other components, it can cause electrical issues and result in this error code.
  • Blown fuse: A blown fuse related to the air/fuel ratio sensor circuit can disrupt its proper functioning and trigger this fault.
  • Faulty PCM (Powertrain Control Module): In some cases, an issue with the vehicle’s PCM may be responsible for generating false readings from sensors like the air/fuel ratio sensor.

To fix this issue I would higly recommend you to watch this video.

To diagnose and resolve this problem, it is recommended to take your Toyota Camry to a qualified mechanic or dealership.

They will use specialized tools such as an OBD-II scanner to retrieve more specific information about what triggered this particular DTC.

Understanding the Air/Fuel Ratio Sensor:

Causes of P1135 Toyota Camry

The air/fuel ratio sensor plays a crucial role in the proper functioning of your Toyota Camry’s engine.

It measures the ratio of air to fuel in the combustion chamber and provides feedback to the engine control module (ECM) for precise fuel injection.

Here are some key points to help you understand this essential component:

  1. Purpose: The primary function of the air/fuel ratio sensor is to ensure optimal fuel mixture, maximizing engine performance while minimizing emissions.
  2. Location: In most Toyota Camry models, the air/fuel ratio sensor can be found mounted on or near the exhaust manifold.
  3. Operation: The sensor contains a ceramic element with a porous coating that detects oxygen content in exhaust gases. This information allows it to calculate changes needed for an ideal air-to-fuel ratio.
  4. Heating Element: To reach operating temperature quickly, especially during cold starts, many sensors include an internal heating element that expedites activation.
  5. Signal Output: The air/fuel ratio sensor generates voltage signals based on readings from its sensing element. These signals vary according to oxygen concentration, indicating whether adjustments are required.
  6. Diagnostic Role: When there is a fault detected by the ECM related to fuel mixture regulation, such as lean or rich conditions beyond acceptable limits, it triggers diagnostic trouble code P1135.

It’s important to note that if your vehicle displays P1135 error code specifically related to air/fuel ratio sensor malfunctioning, other potential causes like bad wiring harnesses or blown fuses should be ruled out before replacing the faulty A/F ratio sensor itself.

Causes of P1135 Toyota Camry

Regular maintenance and periodic inspection of these components can prevent issues arising from incorrect fuel mixtures and ensure smooth operation of your Toyota Camry’s engine.

Key Points
– Primary function: Optimal fuel mixture
– Location: Near/exhaust manifold
– Operation: Ceramic element detects oxygen content
– Heating Element: Quick activation during cold starts
– Signal Output: Voltage signals based on oxygen concentration
– Diagnostic Role: Trigger for P1135 code

Remember, it’s essential to consult a qualified technician or refer to the manufacturer’s documentation for accurate diagnosis and repair procedures related to your specific vehicle model.

Common issues with the wiring harness:

  • Loose or corroded connections: A common issue with the wiring harness is loose or corroded connections. Over time, the connectors can become loose or develop corrosion, which can cause intermittent electrical problems and lead to the P1135 code.
  • Wire damage: Another common issue is wire damage. The wiring harness may be exposed to heat, moisture, and other elements that can cause the wires to deteriorate over time. This can result in frayed or broken wires, leading to a loss of connectivity and triggering the P1135 code.
  • Pinched or chafed wires: In some cases, the wiring harness may get pinched between components or rub against sharp edges within the engine bay. This can cause chafing on the insulation of wires, exposing them and resulting in short circuits or open circuits that trigger fault codes like P1135.
  • Rodent damage: Rodents are known for chewing on wires, especially when vehicles are parked for extended periods. If rodents gain access to your vehicle’s engine compartment, they may chew through wiring harnesses causing significant damage and potentially triggering fault codes such as P1135.

To resolve these common issues with the wiring harness:

  1. Inspect all electrical connections: Regularly check all connectors for signs of looseness or corrosion. If any issues are found, clean and tighten them accordingly.
  2. Check for wire damage: Carefully inspect all sections of your wiring harness for any signs of frayed or broken wires. Replace damaged sections as necessary.
  3. Protect against rodent damage: Take preventive measures such as using rodent repellents around your parking area and sealing off entry points where rodents could enter your vehicle.
  4. Secure routing of harnesses: Ensure proper routing of all wiring harnesses within your vehicle’s engine bay to prevent pinching against components.

By addressing these common issues promptly and taking preventive measures, you can minimize the chances of encountering the P1135 code related to wiring harness problems in your Toyota Camry.

Dealing with Blown Fuses in a Toyota Camry:

When dealing with the P1135 code in your Toyota Camry, one of the potential causes to consider is a blown fuse. Here are some important points to keep in mind when addressing this issue:

  1. Identify the Fuse Box: Locate the fuse box in your Toyota Camry. It is usually found under the dashboard on the driver’s side or inside the engine compartment.
  2. Refer to Owner’s Manual: Consult your owner’s manual to determine which fuse controls the air/fuel ratio sensor and other relevant components related to the P1135 code.
  3. Inspect for Blown Fuse: Carefully examine each fuse visually and look for signs of damage, such as a broken filament or discolored appearance.
  4. Replace Blown Fuse: If you find a blown fuse related to the P1135 code, replace it with an identical one from a spare set available within your vehicle or purchase replacements from an auto parts store.
  5. Remove Old Fuse: Use needle-nose pliers or a dedicated tool (if provided) to pull out the blown fuse.
  6. Insert New Fuse: Align and insert the new fuse into its respective slot until it fits snugly.
  7. Test Functionality: After replacing any blown fuses associated with P1135, start your Toyota Camry and check if there are any remaining error codes indicating further issues.
  8. Seek Professional Assistance if Necessary: If you continue experiencing problems or cannot identify which specific component caused repeated blown fuses, consider seeking help from a qualified technician who can diagnose and repair any underlying issues effectively.

Remember that while replacing blown fuses may temporarily resolve certain electrical problems causing error codes like P1135, it is crucial to address any underlying issues promptly for long-term reliability of your Toyota Camry’s performance.

Troubleshooting problems with the PCM:

When troubleshooting problems with the Powertrain Control Module (PCM) in your Toyota Camry, it’s important to consider a few key factors.

The PCM plays a crucial role in controlling various engine functions and ensuring optimal performance.

Here are some steps you can take to identify and address any potential issues:

  1. Check for error codes: Use an OBD-II scanner to retrieve error codes stored in the PCM memory. These codes can provide valuable clues about specific malfunctions or system failures.
  2. Inspect wiring connections: Make sure all electrical connections related to the PCM are secure and free from corrosion or damage. Loose or faulty connections can lead to communication errors between components.
  3. Verify power supply: Ensure that the PCM is receiving proper voltage from the battery and all relevant fuses are intact. A blown fuse might disrupt communication between sensors and actuators, leading to performance issues.
  4. Test sensor inputs: Evaluate input signals from various sensors connected to the PCM, such as oxygen sensors, mass airflow sensors, or throttle position sensors. Faulty readings may indicate sensor failures that require replacement.
  5. Review software updates: Check if there are any available software updates for your vehicle’s PCM version at authorized service centers or online platforms provided by Toyota. Updating the software can resolve known bugs or improve system functionality.
  6. Consult technical resources: If you’re unable to pinpoint specific issues after following these steps, consult reliable technical resources like repair manuals or online forums dedicated to Toyota vehicles’ diagnostics and repairs.

Remember, addressing potential problems with your car’s PCM requires careful attention to detail and diagnostic procedures tailored specifically for your model year of Toyota Camry.

Conclusion and final thoughts 💭

The P1135 code in a Toyota Camry can be caused by several factors. One possible culprit is a faulty air/fuel ratio sensor, which may need to be replaced to resolve the issue.

Another potential cause could be a bad wiring harness, where damaged or loose connections can disrupt the sensor’s functionality.

Additionally, a blown fuse might also trigger the P1135 code. Checking and replacing any blown fuses related to the air/fuel ratio sensor system could potentially solve the problem.

Lastly, a faulty Powertrain Control Module (PCM) could contribute to the occurrence of this error code.

To determine which specific component is causing the P1135 code in your Toyota Camry, it is recommended to consult with a professional mechanic who has experience diagnosing and repairing these issues.

They will have access to diagnostic tools that can pinpoint the exact source of the problem, allowing for an efficient and accurate repair process.

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest Posts